Wholesale beauty from nailmarketusa
-
Elite Embrace Professional Pearl Powder 03
To apply Elite Embrace Rub Powder, follow these steps: Prepare the base: Apply a Base Coats to the nails. If you’re using a dense color powder, it’s recommended to use a black or dark base color underneath to enhance the final effect. Wipe with alcohol: Once the Base Coats is dry, wipe the nail with 70% alcohol. Wait 7–10 seconds for the alcohol to slightly evaporate. Apply the powder: Rub the powder into the nail using an applicator or your finger. Make sure to cover the entire nail surface eve
-
Elite Embrace Professional Pearl Powder 04
To apply Elite Embrace Rub Powder, follow these steps: Prepare the base: Apply a Base Coats to the nails. If you’re using a dense color powder, it’s recommended to use a black or dark base color underneath to enhance the final effect. Wipe with alcohol: Once the Base Coats is dry, wipe the nail with 70% alcohol. Wait 7–10 seconds for the alcohol to slightly evaporate. Apply the powder: Rub the powder into the nail using an applicator or your finger. Make sure to cover the entire nail surface eve
-
Elite Embrace Professional Pearl Powder 05
To apply Elite Embrace Rub Powder, follow these steps: Prepare the base: Apply a Base Coats to the nails. If you’re using a dense color powder, it’s recommended to use a black or dark base color underneath to enhance the final effect. Wipe with alcohol: Once the Base Coats is dry, wipe the nail with 70% alcohol. Wait 7–10 seconds for the alcohol to slightly evaporate. Apply the powder: Rub the powder into the nail using an applicator or your finger. Make sure to cover the entire nail surface eve
-
Elite Embrace Professional Pearl Powder 07
To apply Elite Embrace Rub Powder, follow these steps: Prepare the base: Apply a Base Coats to the nails. If you’re using a dense color powder, it’s recommended to use a black or dark base color underneath to enhance the final effect. Wipe with alcohol: Once the Base Coats is dry, wipe the nail with 70% alcohol. Wait 7–10 seconds for the alcohol to slightly evaporate. Apply the powder: Rub the powder into the nail using an applicator or your finger. Make sure to cover the entire nail surface eve
-
ELITE EMBRACE Professional Slider Book 160 pages
Book for nail sliders
-
ELITE EMBRACE Professional Top Coat 15 Blue Heart 15ml
To apply Elite Embrace colored top coats, follow these steps: 1. Apply Rubber Base: - Apply a normal layer of rubber base coat to your nails. Ensure it is not too thin. - Cure the base coat under a UV or LED lamp for 60 seconds . 2. Apply Top Coat with Alignment: - Apply the colored top coat carefully, ensuring proper alignment for an even finish. Tips for Best Results - This top coat is ideal for pedicures or strengthening/extensions. - If applying on natural nails, ensure the nails are in good
-
ELITE EMBRACE Professional Top Coat 12 Red Heart 15ml
To apply Elite Embrace colored top coats, follow these steps: 1. Apply Rubber Base: - Apply a normal layer of rubber base coat to your nails. Ensure it is not too thin. - Cure the base coat under a UV or LED lamp for 60 seconds . 2. Apply Top Coat with Alignment: - Apply the colored top coat carefully, ensuring proper alignment for an even finish. Tips for Best Results - This top coat is ideal for pedicures or strengthening/extensions. - If applying on natural nails, ensure the nails are in good
-
ELITE EMBRACE Professional Top Coat Bright Pink 03 15ml
To apply Elite Embrace colored top coats, follow these steps: 1. Apply Rubber Base: - Apply a normal layer of rubber base coat to your nails. Ensure it is not too thin. - Cure the base coat under a UV or LED lamp for 60 seconds . 2. Apply Top Coat with Alignment: - Apply the colored top coat carefully, ensuring proper alignment for an even finish. Tips for Best Results - This top coat is ideal for pedicures or strengthening/extensions. - If applying on natural nails, ensure the nails are in good
-
ELITE EMBRACE Nail Polish Top Coat Light Nude 04, 15ml
To apply Elite Embrace colored top coats, follow these steps: 1. Apply Rubber Base: - Apply a normal layer of rubber base coat to your nails. Ensure it is not too thin. - Cure the base coat under a UV or LED lamp for 60 seconds . 2. Apply Top Coat with Alignment: - Apply the colored top coat carefully, ensuring proper alignment for an even finish. Tips for Best Results - This top coat is ideal for pedicures or strengthening/extensions. - If applying on natural nails, ensure the nails are in good
-
ELITE EMBRACE Gel Top Coat Cream Pie 15ml
To apply Elite Embrace colored top coats, follow these steps: 1. Apply Rubber Base: - Apply a normal layer of rubber base coat to your nails. Ensure it is not too thin. - Cure the base coat under a UV or LED lamp for 60 seconds . 2. Apply Top Coat with Alignment: - Apply the colored top coat carefully, ensuring proper alignment for an even finish. Tips for Best Results - This top coat is ideal for pedicures or strengthening/extensions. - If applying on natural nails, ensure the nails are in good
-
ELITE EMBRACE Gel Nail Top Coat White 05, 15ml
To apply Elite Embrace colored top coats, follow these steps: 1. Apply Rubber Base: - Apply a normal layer of rubber base coat to your nails. Ensure it is not too thin. - Cure the base coat under a UV or LED lamp for 60 seconds . 2. Apply Top Coat with Alignment: - Apply the colored top coat carefully, ensuring proper alignment for an even finish. Tips for Best Results - This top coat is ideal for pedicures or strengthening/extensions. - If applying on natural nails, ensure the nails are in good
-
ELITE EMBRACE Top Gel Coat Milky White 18, 15ml
To apply Elite Embrace colored top coats, follow these steps: 1. Apply Rubber Base: - Apply a normal layer of rubber base coat to your nails. Ensure it is not too thin. - Cure the base coat under a UV or LED lamp for 60 seconds . 2. Apply Top Coat with Alignment: - Apply the colored top coat carefully, ensuring proper alignment for an even finish. Tips for Best Results - This top coat is ideal for pedicures or strengthening/extensions. - If applying on natural nails, ensure the nails are in good
-
ELITE EMBRACE Professional Top Coat Light Beige 02, 15ml
To apply Elite Embrace colored top coats, follow these steps: 1. Apply Rubber Base: - Apply a normal layer of rubber base coat to your nails. Ensure it is not too thin. - Cure the base coat under a UV or LED lamp for 60 seconds . 2. Apply Top Coat with Alignment: - Apply the colored top coat carefully, ensuring proper alignment for an even finish. Tips for Best Results - This top coat is ideal for pedicures or strengthening/extensions. - If applying on natural nails, ensure the nails are in good
-
Ellipse blue bit GSAE 1,8P-4,5C
Diamond Bit "Ellipse" Application in Nail and Pedicure Procedures: • Treatment of lateral nail folds • Callus treatment and removal • Crack treatment ISO 866.104.277.045.018 Working part diameter: 1.8 mm Working part length: 4.5 mm Shank diameter: 2.3 mm Grain size: Medium The recommended applications of this burr are for general reference. The choice of burr should be made individually for each client.
-
Ellipse blue bit GSAE 2,3P-5C
Diamond Bit "Ellipse" Application in Nail and Pedicure Procedures: • Treatment of lateral nail folds • Callus treatment and removal • Crack treatment ISO 866.104.277.050.023 Working part diameter: 2.3 mm Working part length: 5.0 mm Shank diameter: 2.3 mm Grain size: Medium The recommended applications of this burr are for general reference. The choice of burr should be made individually for each client.
-
Elongated pedicure disc PODODISC L EXPERT and set of disposable files 180 grit 5 pcs (25 mm)
Metal pedicure disc PODODISC STALEKS PRO S with elongated leg. Allows you to perform high-quality and safe pedicures, minimizing the possibility of infection. Reduces the time of the pedicure procedure. Size S - diameter of the working part 15 mm. Used in working with disposable files. Allow using different abrasives files. Extended length of the leg 37 mm allows the use of the disk in devices with a vacuum cleaner. Lightweight version of the metal base with drop-like holes: does not overheat, h
-
Elongated pedicure disc PODODISC M EXPERT and set of disposable files 180 grit 5 pcs (20 mm)
Metal pedicure disc PODODISC STALEKS PRO S with elongated leg. Allows you to perform high-quality and safe pedicures, minimizing the possibility of infection. Reduces the time of the pedicure procedure. Size S - diameter of the working part 15 mm. Used in working with disposable files. Allow using different abrasives files. Extended length of the leg 37 mm allows the use of the disk in devices with a vacuum cleaner. Lightweight version of the metal base with drop-like holes: does not overheat, h
-
Elongated pedicure disc PODODISC S EXPERT and set of disposable files 180 grit 5 pcs (15 mm)
Metal pedicure disc PODODISC STALEKS PRO S with elongated leg. Allows you to perform high-quality and safe pedicures, minimizing the possibility of infection. Reduces the time of the pedicure procedure. Size S - diameter of the working part 15 mm. Used in working with disposable files. Allow using different abrasives files. Extended length of the leg 37 mm allows the use of the disk in devices with a vacuum cleaner. Lightweight version of the metal base with drop-like holes: does not overheat, h
-
Enamel Oval Brush
Flat Brush for hard gels and polygels
-
Extention Forms KR(300 pcs)
Self-adhesive with good adhesion. If it is firmly fixed on your finger to prevent instability when you are applying the polygel for nail extensions. These extension forms are used for challenging shapes!
-
Extention Forms WNN(300 pcs)
Self-adhesive with good adhesion. If it is firmly fixed on your finger to prevent instability when you are applying the polygel for nail extensions. These extension forms are used for challenging shapes!
-
Filter SHEMAX
It is highly recommended to change the filter every 2 months if you have a full time clientele. SheMax filters accumulate dust and instantly absorbs it into the compartments. The compressed dust loses its “mobility” property and is easily disposed of without residues. How to care for the extractor filter for manicure and pedicure SheMax? Do not wash the filter (only dry care) Shake the filter after each client Fine particles clogged in fibers, preferably cleaned with any narrow brush We recommen
-
Flame blue bit GAP 2,5P-6C
Diamond Bit "Flame Short" Application in Nail and Pedicure Procedures: • Treatment of lateral nail folds • Callus treatment and removal • Crack treatment ISO 866.104.254.060.025 Working part diameter: 2.5 mm Working part length: 6.0 mm Shank diameter: 2.3 mm Grain size: Medium The recommended applications of this burr are for general reference. The choice of burr should be made individually for each client.
-
Flame blue bit GSAP 1,2P-8C
Diamond Bit Flame Application in Nail and Pedicure Procedures: • Drilling holes for rhinestones and piercings • Treatment of lateral nail folds • Callus treatment and removal • Crack treatment ISO 866.104.243.080.012 Working part diameter: 1.2 mm Working part length: 8.0 mm Shank diameter: 2.3 mm Grain size: Medium The recommended applications of this burr are for general reference. The choice of burr should be made individually for each client.
-
Flame blue bit GSAP 1,8P-10C/T
Diamond Bit (Blunt Flame) Applications in Hardware Manicure and Pedicure: • Treating side rollers • Removing calluses • Treating cracks Specifications: • ISO: 866.104.243.100.018 • Working part diameter (mm): 1.8 • Working part length (mm): 10.0 • Shank diameter (mm): 2.3 • Grit size: Medium The use of burs is provided as a recommendation only; the bur should be selected individually for each client.
-
Flame blue bit GSAP 1,8P-5C
Diamond Bit "Flame" Specifications Application in Nail and Pedicure Procedures: • Treatment of lateral nail folds • Callus treatment and removal • Crack treatment ISO 866.104.244.050.018 Working part diameter: 1.8 mm Working part length: 5.0 mm Shank diameter: 2.3 mm Grain size: Medium The recommended applications of this burr are for general reference. The choice of burr should be made individually for each client.
-
Flame blue bit GSAP 2,1P-8C/T
Diamond Bit (Blunt Flame) Application in Nail and Pedicure Procedures: • Treatment of lateral nail folds • Callus treatment and removal • Crack treatment ISO 866.104.243.080.021 Working part diameter: 2.1 mm Working part length: 8.0 mm Shank diameter: 2.3 mm Grain size: Medium The recommended applications of this burr are for general reference. The choice of burr should be made individually for each client.
-
Flame blue bit GSAP 2,2P-5C
Diamond Bit "Kidney" Specifications Application in Nail and Pedicure Procedures: • Treatment of lateral nail folds • Callus treatment and removal • Crack treatment ISO 866.104.244.050.022 Working part diameter: 2.2 mm Working part length: 5.0 mm Shank diameter: 2.3 mm Grain size: Medium The recommended applications of this burr are for general reference. The choice of burr should be made individually for each client.
-
Flame red bit GAP 2,5P-6M
Diamond Bit Short Flame Applications in Hardware Manicure and Pedicure: • Treating side rollers • Removing calluses • Treating cracks Specifications: • ISO: 856.104.254.060.025 • Working part diameter (mm): 2.5 • Working part length (mm): 6.0 • Shank diameter (mm): 2.3 • Grit size: Fine The use of burs is provided as a recommendation only; the bur should be selected individually for each client.
-
Flame red bit GSAP 1,0P-7M
Diamond Bit Flame Applications in Hardware Manicure and Pedicure: • Drilling areas for rhinestones and piercings • Treating side rollers • Treating cracks Specifications: • ISO: 856.104.243.070.010 • Working part diameter (mm): 1.0 • Working part length (mm): 7.0 • Shank diameter (mm): 2.3 • Grit size: Fine The use of burs is provided as a recommendation only; the bur should be selected individually for each client.
-
Flame red bit GSAP 1,6P-10M
Diamond Bit Flame Applications in Hardware Manicure and Pedicure: • Drilling areas for rhinestones and piercings • Treating side rollers • Removing calluses • Treating cracks Specifications: • ISO : 856.104.243.100.016 • Working part diameter (mm): 1.6 • Working part length (mm): 10.0 • Shank diameter (mm): 2.3 • Grit size: Fine The use of burs is provided as a recommendation only; the bur should be selected individually for each client.
-
Flame red bit GSAP 1,8P-10M/T
Diamond Bit (Blunt Flame) Application in Hardware Manicure and Pedicure: • Treatment of sidewalls • Treatment and removal of calluses • Handling cracks Specifications: • ISO Code: 856.104.243.100.018 • Working part diameter, mm: 1.8 • Working part length, mm: 10.0 • Shank diameter, mm: 2.3 • Grit size: Fine Note: The recommended uses are for reference only. The choice of bur is tailored individually for each client.
-
Flame red bit GSAP 1,8P-5M
Diamond Bit - Flame Diamond Bit - Bud (Pine Cone) Application in Hardware Manicure and Pedicure: • Treatment of sidewalls • Treatment and removal of calluses • Handling cracks Specifications: • ISO Code: 856.104.244.050.018 • Working part diameter, mm: 1.8 • Working part length, mm: 5.0 • Shank diameter, mm: 2.3 • Grit size: Fine Note: The recommended uses are for reference only. The choice of bur is tailored individually for each client.
-
Flame red bit GSAP 1,8P-8M
Diamond Bit - Flame Application in Hardware Manicure and Pedicure: • Treatment of sidewalls • Treatment and removal of calluses • Handling cracks Specifications: • ISO Code: 856.104.243.080.018 • Working part diameter, mm: 1.8 • Working part length, mm: 8.0 • Shank diameter, mm: 2.3 • Grit size: Fine Note: The recommended uses are for reference only. The choice of bur is tailored individually for each client.
-
Flame red bit GSAP 2,1P-8M KMIZ
Diamond Bit Flame Applications in Hardware Manicure and Pedicure: • Treating side rollers • Removing calluses • Treating cracks Specifications: • ISO: 856.104.243.080.021 • Working part diameter (mm): 2.1 • Working part length (mm): 8.0 • Shank diameter (mm): 2.3 • Grit size: Fine The use of burs is provided as a recommendation only; the bur should be selected individually for each client.
-
Flame red bit GSAP 2,1P-8M/T
Diamond Bit (Blunt Flame) Applications in Hardware Manicure and Pedicure: • Treating side rollers • Removing calluses • Treating cracks Specifications: • ISO: 856.104.243.080.021 • Working part diameter (mm): 2.1 • Working part length (mm): 8.0 • Shank diameter (mm): 2.3 • Grit size: Fine The use of burs is provided as a recommendation only; the bur should be selected individually for each client.
-
Flame red bit GSAP 2,2P-5M
Diamond Bit Flame Diamond Bit Bud Applications in Hardware Manicure and Pedicure: • Treating side rollers • Removing calluses • Treating cracks Specifications: • ISO: 856.104.244.050.022 • Working part diameter (mm): 2.2 • Working part length (mm): 5.0 • Shank diameter (mm): 2.3 • Grit size: Fine The use of burs is provided as a recommendation only; the bur should be selected individually for each client.
-
Flame red bit GSAP 2,3P-10M
Diamond Bit Flame Applications in Hardware Manicure and Pedicure: • Treating side rollers • Removing calluses • Treating cracks Specifications: • ISO: 856.104.243.100.023 • Working part diameter (mm): 2.3 • Working part length (mm): 10.0 • Shank diameter (mm): 2.3 • Grit size: Fine The use of burs is provided as a recommendation only; the bur should be selected individually for each client.
-
Flame red bit GSAP 2,3P-10M/T
Diamond Bit (Blunt Flame) Applications in Hardware Manicure and Pedicure: • Treating side rollers • Removing calluses • Treating cracks Specifications: • ISO: 856.104.243.100.023 • Working part diameter (mm): 2.3 • Working part length (mm): 10.0 • Shank diameter (mm): 2.3 • Grit size: Fine The use of burs is provided as a recommendation only; the bur should be selected individually for each client.
-
Flame red bit GSAP 2,3P-8M
Diamond Bit – Flame Shape Dental Applications: • Polishing tooth tissues and fillings after initial grinding • Tooth preparation for inlays Applications in Hardware Manicure & Pedicure: • Treatment of lateral nail folds • Cuticle work • Removal of pterygium and cuticle Specifications: • ISO: 856.104.243.080.023 • Head diameter: 2.3 mm • Working part length: 8.0 mm • Shank diameter: 2.35 mm • Grit size: Fine Note: The recommended uses are for reference only. The bit should be selected individuall
-
Flame Tornado blue bit FAPT 2,1P-10C
Diamond Bit "Flame Tornado" Application in Nail and Pedicure Procedures: • Treatment of lateral nail folds • Callus treatment and removal • Crack treatment ISO 866.104.243.100.021 Working part diameter: 2.1 mm Working part length: 10.0 mm Shank diameter: 2.3 mm Grain size: Medium The recommended applications of this burr are for general reference. The choice of burr should be made individually for each client.
-
Flame Tornado red bit GSAPS 2,1P-10M
Diamond Bit Flame Tornado Applications in Hardware Manicure and Pedicure: • Treating side rollers • Removing calluses • Treating cracks Specifications: • ISO: 856.104.243.100.021 • Working part diameter (mm): 2.1 • Working part length (mm): 10.0 • Shank diameter (mm): 2.3 • Grit size: Fine The use of burs is provided as a recommendation only; the bur should be selected individually for each client.
-
Flame yellow bit GSAP 1,6P-10OM
Diamond Bit "Flame" Application in Dentistry: • Precision polishing of fillings, finishing composites, and their edges Application in Nail and Pedicure Procedures: • Drilling holes for rhinestones and piercings • Treatment of lateral nail folds • Callus treatment and removal • Crack treatment ISO 836.104.243.100.016 Working part diameter: 1.6 mm Working part length: 10.0 mm Shank diameter: 2.3 mm Grain size: Very fine The recommended applications of this burr are for general reference. The choic
-
Flame yellow bit GSAP 1,8P-10OM/T
Diamond Bit (Blunt Flame) Application in Nail and Pedicure Procedures: • Treatment of lateral nail folds • Callus treatment and removal • Crack treatment ISO 836.104.243.100.018 Working part diameter: 1.8 mm Working part length: 10.0 mm Shank diameter: 2.3 mm Grain size: Very fine The recommended applications of this burr are for general reference. The choice of burr should be made individually for each client.
-
Flame yellow bit GSAP 2,1P-8C
Diamond Bit "Flame" Application in Dentistry: • Precision polishing of fillings, finishing composites, and their edges Application in Nail and Pedicure Procedures: • Treatment of lateral nail folds • Callus treatment and removal • Crack treatment ISO 836.104.243.080.021 Working part diameter: 2.1 mm Working part length: 8.0 mm Shank diameter: 2.3 mm Grain size: Very fine The recommended applications of this burr are for general reference. The choice of burr should be made individually for each c
-
Flame yellow bit GSAP 2,1P-8OM
Diamond Bit "Flame" Application in Dentistry: • Precision polishing of fillings, finishing composites, and their edges Application in Nail and Pedicure Procedures: • Treatment of lateral nail folds • Callus treatment and removal • Crack treatment ISO 836.104.243.080.021 Working part diameter: 2.1 mm Working part length: 8.0 mm Shank diameter: 2.3 mm Grain size: Very fine The recommended applications of this burr are for general reference. The choice of burr should be made individually for each c
-
Flame yellow bit GSAP 2,1P-8OM/T
Diamond Bit (Blunt Flame) Application in Nail and Pedicure Procedures: • Treatment of lateral nail folds • Callus treatment and removal • Crack treatment ISO 836.104.243.080.021 Working part diameter: 2.1 mm Working part length: 8.0 mm Shank diameter: 2.3 mm Grain size: Very fine The recommended applications of this burr are for general reference. The choice of burr should be made individually for each client.
-
Flame yellow bit GSAP 2,3P-10OM/T
Diamond Bit (Blunt Flame) Application in Nail and Pedicure Procedures: • Treatment of lateral nail folds • Callus treatment and removal • Crack treatment ISO 836.104.243.100.023 Working part diameter: 2.3 mm Working part length: 10.0 mm Shank diameter: 2.3 mm Grain size: Very fine The recommended applications of this burr are for general reference. The choice of burr should be made individually for each client.
-
Flashlight
UV flashlight 1,4" x3,5" for nails features can easily adhesive nails tips or upper forms extension
-
Footlogix Cold Feet Formula Mousse [4], 125ml
This formula with Dermal Infusion Technology® stimulates micro-circulation and provides relief to chronically cold feet. Contains Arnica and Rosemary to stimulate and improve circulation and Urea to lock in moisture. Invigorates the skin, alleviating numb or cold sensations.
-
Footlogix Foot Soak, 125ml
A pH balanced, gentle, cleansing foot soak, which helps soften dry, rough skin without dehydrating the skin while soaking.
-
Footlogix Peeling Skin Formula Mousse [7], 125ml
This formula, with Dermal Infusion Technology®, provides relief of peeling, scaling, itching between the toes and irritation for feet prone to fungal infections. Protects and cares for clammy feet prone to Athlete’s Foot. Contains no added moisturizers.
-
French Manicure Art Stickers (12 sheets, 3 moon shape)
12 Sheets French Manicure Art Stickers, 3 Designs Self-Adhesive Nail Tips Decoration Templates Tool Guide (3 Moon Shape Designs, 12 Sheets)
-
Gel Tips Almond (240 pcs)
Gel Tips Almond (240 pcs)
-
Gel Tips Coffin Extra Long (240 pcs)
Gel Tips Coffin Extra Long (240 pcs)
-
Gel Tips Coffin Long (240 pcs)
Gel Tips Coffin Long (240 pcs)
-
Gel Tips Coffin Med half matte (240 pcs)
Gel Tips Coffin Med half matte (240 pcs)
-
Gel Tips Stiletto (240 pcs)
Gel Tips Stiletto (240 pcs)
-
GRAPE CB №004 (reflective), 15ml
-
Gratol Camouflage Base 13, 9ml
Grattol gel polishes are produced according to the "14 FREE" system. This means they are free from the most toxic substances, reducing the risk of allergies. Composition: di-hema trimethylhexyl dicarbamate, hema, cellulose acetate butyrate, hydroxypropyl methacrylate, phosphonooxethylmethacrylate, dis (methacryloyloxyethyl) phosphate, ethylphenyl trimethylbenzoyl phosphinate, hodroxycyclohexyl phenyl ketone, p-hydroxyanisole.